Compare Capular Tension Segments

arrow Created with Sketch.
arrow Created with Sketch.
3 Products

reset all

At-a-Glance

Description

FDA

CE Mark

Material

remove

close Created with Sketch.
  • Total diameter: Type 6D, 9.5 mm diameter; Type 6E, 10 mm diameter
  • Angle: 120°
  • One or more segments may be used as necessary to support the areas of the capsule that have damaged or insufficient zonular support.

The Ahmed CTS, designed by Ike Ahmed, MD, is a modification of the Cionni capsular tension ring (Morcher GmbH) and is indicated for significant zonular weakness. This segment covers approximately one quadrant with a hole for temporary or permanent fixation.

Yes

Yes

Clear PMMA

remove

close Created with Sketch.
  • Total diameter: 9.5 mm
  • Angle: 120°
  • The company recommends use of 9-0 double armed Prolene sutures with spatula needles.

The Type 6D capsular segment has a curved design and one suturable arm that projects outward from the center of the segment.

No

Not specified

Clear PMMA

remove

close Created with Sketch.
  • Total diameter: 8.6 mm
  • Angle: 120°
  • The company recommends use of 9-0 double armed Prolene sutures with spatula needles

The Type 9L capsular segment has a curved design with notches and two suturable arms at either end of the segment.

No

Not specified

Clear PMMA